Categories

Contact Us

Cangzhou Qiancheng Stainless Products Co.,Ltd
Add:Tianzhuangzi Town, Zhifangtou Village, Cang County, Cangzhou City, Hebei Province, China. 061000.
Tel:+86-317-4953899
Fax:+86-317-4953796
Ph:+8615930783048
E-mail:sales1@qcfitting.com
Skype:auxgm2792

Six Common Types of Aerospace Fittings

- Dec 15, 2017 -

Fitting Types

In the aerospace industry,  sections of tubing are usually attached with flared or flareless (compression type) fittings, unlike steel pipe. The SAE Aerospace Standard (AS) establishes the requirements for fittings that are used in all types of fluid systems. 

Six of the more common thread styles and connections include: 

  1. AN 24 degree cone flareless connection fittings and nuts for use in aircraft fluid
    systems at nominal operating pressures up to and including 3000 psi.

  2.  AN 37 degree JIC (Joint Industry Council) flared internal cone fluid connection
    fittings for use with 37 degree external cone spherical nose and seal ring fittings are
    used in many types of aerospace fluid systems.

  3. O-ring boss (ORB), where a male-threaded part is inserted into a female-threaded
    part, providing a mechanical rubber seal.

  4. NPT (National Pipe Thread) providing a leak-free seal without the need of PTFE tape
    or other sealant compound.

  5. Hose Barbs which allow for an easy push-connection of flexible-plastic or rubber
    hose that is not so easily disconnected.

  6. Hose Clamps used to attach and seal a hose onto a fitting such as a barb or nipple.

Other common fluid connection styles and configurations include:

Bushings, nipples, sleeves, caps, nuts, push-to-connect couplings, crosses, plugs, tees, elbows, reducers, and unions/1.

One important thing to note is that though some fittings may look identical, no two fittings are the same. The AN (Army-Navy) military standard calls for tighter tolerances and defines all fitting types, whereas the JIC (Joint Industry Council) uses AN specifications as the base line for their own standards and covers fewer sizes. Though JIC fittings and adapters are very similar to the same size AN, JIC tolerances are more lenient than the comparable AN component. Military grade AN
fittings are the best choice for critical applications because they provide a superior sealing surface and have tighter dimensional tolerances than JIC fittings. That being said, JIC components are still a reliable choice for less critical applications. 


Related Products