Categories

Contact Us

Cangzhou Qiancheng Stainless Products Co.,Ltd
Add:Tianzhuangzi Town, Zhifangtou Village, Cang County, Cangzhou City, Hebei Province, China. 061000.
Tel:+86-317-4953899
Fax:+86-317-4953796
Ph:+8615930783048
E-mail:sales1@qcfitting.com
Skype:auxgm2792

3 Major Signs of Hydraulic System Failure

- Dec 23, 2017 -

Abnormal Noise

Abnormal noise in hydraulic systems is often caused by aeration or cavitation. Aeration occurs when air contaminates the hydraulic fluid. Air in the hydraulic fluid makes an alarming banging or knocking noise when it compresses and decompresses, as it circulates through the system.

Cavitation occurs when the volume of fluid demanded by any part of a hydraulic circuit exceeds the volume of fluid being supplied. This causes the absolute pressure in that part of the circuit to fall below the vapor pressure of the hydraulic fluid. This results in the formation of vapor cavities within the fluid, which implode when compressed, causing a characteristic knocking noise.

High Fluid Temperature

Fluid temperatures above 180°F (82°C) can damage seals and accelerate degradation of the fluid. This means that the operation of any hydraulic system at temperatures above 180°F is detrimental and should be avoided. In addition to damaging seals and reducing the service life of the hydraulic fluid, high fluid temperature can cause damage to system components through inadequate lubrication as a result of excessive thinning of the oil film (low viscosity).

Slow Operation

A reduction in machine performance is often the first indication that there is something wrong with a hydraulic system. This usually manifests itself in longer cycle times or slow operation.

If you’re seeing these symptoms in your equipment or machinery, it’s time to consider some preventative maintenance before any major damage is done.

Whether it’s a preventative measure or emergency response, QCSS has the capacity, inventory, and shipping capability to help you repair or replace your hydraulic fittings and hose assemblies quickly and reliably. This reduces the downtime our customers experience when their systems fail and fast component repair or replacement is time critical.


Related Products